Go to CertainTeed Machine Works Home Page
Click here to return to the home page
Products - Volu-Matic® V High Performance Insulation Blowing Machine
Blowing Machines
  CT Machine Works
Volu-Matic® SE
Volu-Matic® MS
Blowing Machine Comparative Matrix
Volu-Matic® III
Volu-Matic® III Electric
Volu-Matic® IV
Volu-Matic® V
Blowing Machine Comparative Matrix
Fireproofing Machines
Poly-Spray® C-500
Vac-Matic™ Series
Measurement Devices

Volu-Matic® V High Performance Insulation Blowing Machine
The ultimate in versatility
Click for enlarged view of Volu-Matic® V High Performance Insulation Blowing Machine

The Volu-Matic® V is a dual-purpose machine. It has all the features and capabilities of the Volu-Matic® III and is designed to spray and recycle approved products into interior sidewalls. Our proprietary custom vacuum system returns excess insulation to the hopper for remix into the blend. It produces more vacuum and less air movement, resulting in less fiber fly in the hopper and truck. Since the vacuum system is part of the machine, no additional labor is required to set up on the job site.

• PTO (power take-off)
• Fully sealed blow-through air-lock feeder
• Positive displacement blower
• Air bleed system with panel-mounted gauge
• Four-speed automatic transmission
• Material control slide
• Heavy-duty gearboxes
• Heavy-duty electric clutches
• Integrated vacuum system
• Material deceleration box
• Built-in water pump
• Expanded hopper
• Automatic back flow check valve
• Automatic pressure relief valve
• Electrical overload protection
• Mechanical overload protection
• Self-aligning sealed bearings
• Adjustable drive belts
• Wired remote control
• Integrated safety features

• Wireless remote control
• Quick-change seal system
• One model available:
     • V5PTO - power take-off (PTO) on truck

• Typical feed rate:
     • Fiber glass - 25-35 lbs. (11.3-15.9 kg)/min.
     • Rockwool - 35-55 lbs. (15.9-25.0 kg)/min.
     • Cellulose - 70-80 lbs. (31.7-36.1 kg)/min.

. Load height: 60" (152 cm)
• Height: 88" (224 cm)
• Depth: 88.5" (225 cm)
• Width: 80" (203 cm)
• Weight: 2500 lbs. (1134 kg)
Volu-Mattic® V instruction manual (PDF)
Volu-Mattic® V brochure (PDF)

Adobe® Acrobat® Reader® software is required to display the PDFs. If you do not have Acrobat® Reader® on your computer, click the icon to the left to download and launch the installer.

Fully Sealed Blow-Through Air-Lock Feeder - The steel feeder has one-piece seals around all three sides of each rotor blade to create a tight seal under pressure and help eliminate wear in the feeder housing and ensure a more consistent flow of fiber. The machine is designed to blow through each chamber of the air-lock feeder to put insulation material directly into the airstream.

Positive Displacement Blower - The blower automatically increases pressure to the limit of the blower relief valve to prevent plugging of the hose.

Air Bleed System with Panel-Mounted Gauge - Allows for variable control of air volume to aid in fine-tuning of the air-to-material ratio.

Four-Speed Transmission - Allows the operator to vary speed of all internal hopper components and air-lock feeder for additional control of the air-to-material ratio, for optimum material performance.

Material Control Slide - The easily adjustable slide position provides additional control of the air-to-material ratio.

Heavy-Duty Gearboxes - The Volu-Matic® III, Volu-Matic® III Electric, Volu-Matic® V, Multi-MaticT and Attic-MaticT are equipped with heavy-duty gearboxes. Synthetic lubricants are also used for a long, dependable life.  

Heavy-Duty Electric Clutches - Dependable 12-volt brushless clutches offer a long service life. The clutches allow for independent control of air and/or fiber flow.  

Integrated Vacuum System - Standard equipment on the Volu-Matic® V and Multi-MaticT. In wall spray applications the vacuum allows scrubbed or recycle material to be returned to the machine for remix into the blend.  

Material Deceleration Box - Standard on the Volu-Matic® V, the deceleration box lowers the velocity of scrubbed or recycle fiber returned to the machine. Special internal baffles help distribute the fiber across the machine hopper.  

Built-In Water Pump - Standard on the Volu-Matic® V and available for most machines, the built-in water pump is used to supply water and/or adhesive to the spray nozzle at the point of application.  

Expanded Hopper - Larger capacity hopper holds more material, frees up person in truck to do other tasks while hopper is emptying.  

Automatic Back Flow Check Valve - The check valve in the air line between the blower and the feeder keeps material from being forced back into the blower by back-pressure when the machine stops blowing.

Automatic Pressure Relief Valve - Factory preset valve protects the positive displacement blower from pressure spikes.  

Electrical Overload Protection - All machines are protected by circuit breakers sized for the individual circuits. The circuit breakers are designed to be reset should a trip occur.  

Mechanical Overload Protection - Special, easily replaceable shear keys offer protection from damage by foreign objects.  

Self-Aligning Sealed Bearings - High quality bearings are used throughout the CertainTeed Machine Works product line. They are sealed to keep out dust and equipped with grease zerks for proper maintenance.  

Adjustable Drive Belts - Special belt-tightening screws make it easy to keep the belts properly tensioned as they wear.  

Wired Remote Control - A wired remote is supplied for machine control at the point of application.

Integrated Safety Features - Front, rear and side guards surround all moving parts. In addition to an electrical interlock that disables the drive mechanism when the front safety guard is opened, emergency stop switches are standard for additional protection.  

Wireless Remote Control - A wireless remote control is available as an option on all Unisul and CertainTeed Machine Works machines.  

Quick-Change Seal System - Standard on the Volu-Matic® IV, optional on the Volu-Matic® III and Volu-Matic® V. Allows quick access to the air-lock feeder rotor for inspection or replacement of seals when required.

Question or Comment?
If you’ve seen a product you’re interested in, have purchased a product from us and need more info, or have any other general questions/comments, please let us know! We’ll get back to you ASAP!

Email Address:




Insulation Blowing Machines
Volu-Matic® SE Volu-Matic® V
Volu-Matic® MS TrueComfort®
Volu-Matic® III Attic-Matic™
Volu-Matic® III Electric Multi-Matic™
Volu-Matic® IV Blowing Machine Comparative Matrix
Vac-Matic™ Series
Fire Proofing Machines
Poly-Spray® C-500
Measurement Devices
Multi-Tank™ Material Deceleration Box
Wireless Remote Control Systems Hose Accessories
MP-20 Water Pump Kits Remote Control Cords
Uni-Flex™ Hose Liquid Supply Hose
Tigerflex® Hose Measurement Devices