Go to CertainTeed Machine Works Home Page
Click here to return to the home page
Products - Attic-Matic™ Insulation Blowing Machine
Blowing Machines
  CT Machine Works
Volu-Matic® SE
Volu-Matic® MS
Blowing Machine Comparative Matrix
Volu-Matic® III
Volu-Matic® III Electric
Volu-Matic® IV
Volu-Matic® V
Blowing Machine Comparative Matrix
Fireproofing Machines
Poly-Spray® C-500
Vac-Matic™ Series
Measurement Devices

Attic-Matic™ Insulation Blowing Machine
The perfect size for smaller jobs
Click for enlarged view of Attic-Matic™ Insulation Blowing Machine

The Attic-Matic™ has all the quality features of the larger Volu-Matic® series machines, but is designed for contractors whose workload does not justify the higher production rates delivered by a full-size machine. It works well for attic, enclosed sidewall and netted cavity insulation.

*The Attic-Matic is no longer in production. Please see the Volu-Matic SE or MS models for a comparable, cost competitive machine. We will continue to offer service and parts for the Attic-Matic until further notice.

• PTO (power take-off), gas or diesel engine
• Fully sealed blow-through air-lock feeder
• Positive displacement blower
• Air bleed system with panel-mounted gauge
• Material control slide
• Automatic back flow check valve
• Electrical overload protection
• Mechanical overload protection
• Self-aligning sealed bearings
• Adjustable drive belts
• Wired remote control
• Integrated safety features

• Wireless remote control
• Built-in water pump
• Hopper extensions
• Two models available:
     • AMPTO - power take-off (PTO) on truck
     • AMKA2 - 18-horsepower gas engine

• Typical feed rate*:
     • Fiber glass - 15-20 lbs. (6.8-9.1 kg)/min.
     • Rockwool - 25-30 lbs. (11.3-13.6 kg)/min.
     • Cellulose - 30-50 lbs. (13.6-22.7 kg)/min.
     *These rates possible with up to 250 feet of 4" ID hose.

• Load height: 56" (142 cm)
• Height: 67" (170 cm)
• Depth: 48" (122 cm)
• Width: 75" (191 cm)
• Weight: 1480 lbs. (671 kg)
Attic-Mattic™ instruction manual (PDF)
Attic-Mattic™ brochure (PDF)

Adobe® Acrobat® Reader® software is required to display the PDFs. If you do not have Acrobat® Reader® on your computer, click the icon to the left to download and launch the installer.

Fully Sealed Blow-Through Air-Lock Feeder - The steel feeder has one-piece seals around all three sides of each rotor blade to create a tight seal under pressure and help eliminate wear in the feeder housing and ensure a more consistent flow of fiber. The machine is designed to blow through each chamber of the air-lock feeder to put insulation material directly into the airstream.

Positive Displacement Blower - The blower automatically increases pressure to the limit of the blower relief valve to prevent plugging of the hose.

Air Bleed System with Panel-Mounted Gauge - Allows for variable control of air volume to aid in fine-tuning of the air-to-material ratio.  

Material Control Slide - The easily adjustable slide position provides additional control of the air-to-material ratio.  

Automatic Back Flow Check Valve - The check valve in the air line between the blower and the feeder keeps material from being forced back into the blower by back-pressure when the machine stops blowing.

Electrical Overload Protection - All machines are protected by circuit breakers sized for the individual circuits. The circuit breakers are designed to be reset should a trip occur.  

Mechanical Overload Protection - Special, easily replaceable shear keys offer protection from damage by foreign objects.  

Self-Aligning Sealed Bearings - High quality bearings are used throughout the CertainTeed Machine Works product line. They are sealed to keep out dust and equipped with grease zerks for proper maintenance.  

Adjustable Drive Belts - Special belt-tightening screws make it easy to keep the belts properly tensioned as they wear.  

Wired Remote Control - A wired remote is supplied for machine control at the point of application.

Integrated Safety Features - Front, rear and side guards surround all moving parts. In addition to an electrical interlock that disables the drive mechanism when the front safety guard is opened, emergency stop switches are standard for additional protection.

Wireless Remote Control - A wireless remote control is available as an option on all Unisul and CertainTeed Machine Works machines.  

Built-In Water Pump - Standard on the Volu-Matic® V and available for most machines, the built-in water pump is used to supply water and/or adhesive to the spray nozzle at the point of application.  

Hopper Extensions - Increase capacity of standard material hopper. Frees up person in truck to do other tasks while hopper is emptying.

Question or Comment?
If you’ve seen a product you’re interested in, have purchased a product from us and need more info, or have any other general questions/comments, please let us know! We’ll get back to you ASAP!

Email Address:




Insulation Blowing Machines
Volu-Matic® SE Volu-Matic® V
Volu-Matic® MS TrueComfort®
Volu-Matic® III Attic-Matic™
Volu-Matic® III Electric Multi-Matic™
Volu-Matic® IV Blowing Machine Comparative Matrix
Vac-Matic™ Series
Fire Proofing Machines
Poly-Spray® C-500
Measurement Devices
Multi-Tank™ Material Deceleration Box
Wireless Remote Control Systems Hose Accessories
MP-20 Water Pump Kits Remote Control Cords
Uni-Flex™ Hose Liquid Supply Hose
Tigerflex® Hose Measurement Devices