Go to CertainTeed Machine Works Home Page
Click here to return to the home page
 
Products - Volu-Matic® III High Performance Insulation Blowing Machine
 
Blowing Machines
  CT Machine Works
 
»
Volu-Matic® SE
 
»
Volu-Matic® MS
 
»
TrueComfort®
 
»
Blowing Machine Comparative Matrix
 
Unisul
 
»
Volu-Matic® III
 
»
Volu-Matic® III Electric
 
»
Volu-Matic® IV
 
»
Volu-Matic® V
 
»
Attic-Matic™
 
»
Multi-Matic™
 
»
Blowing Machine Comparative Matrix
 
Fireproofing Machines
»
Poly-Spray® C-500
 
Vacuums
»
Vac-Matic™
 
Spray Foam Systems & Equipment
  Systems
 
»
Truck Mounted Rigs
 
»
Trailer Mounted and Portable Units
 
Equipment
 
»
Extensive Graco® Parts Inventory
»
Dynasolve CU-6 Equipment Cleaner
 
Measurement Devices
»
Measure-Matic™
   

Volu-Matic® III High Performance Insulation Blowing Machine

The industry benchmark.

Bookmark and Share
 
Click for enlarged view of Volu-Matic® III High Performance Insulation Blowing Machine

The Volu-Matic® III is an ideal machine for installation of attic, closed sidewall and netted cavity insulation. Professional contractors will enjoy the benefits of higher product delivery rates, less downtime and longer equipment life. The Volu-Matic® III features a rugged drive system with two oversized gearboxes and two heavy-duty electric clutches. The innovative air control system allows the operator to adjust the volume of air without decreasing the pressure capability. Electric motors are available for in-plant applications.



 
STANDARD
• PTO (power take-off), gas or diesel engine, electric
• Fully sealed blow-through air-lock feeder
• Positive displacement blower
• Air bleed system with panel-mounted gauge
• Four-speed transmission
• Material control slide
• Heavy-duty gearboxes
• Heavy-duty electric clutches
• Automatic back flow check valve
• Automatic pressure relief valve
• Electrical overload protection
• Mechanical overload protection
• Self-aligning sealed bearings
• Adjustable drive belts
• Wired remote control
• Integrated safety features

OPTIONAL
• Wireless remote control
• Quick-change seal system
• Built-in water pump
• Hopper extensions
• Four models available:
     • V3PTO - power take-off (PTO) on truck
     • V3KA2 - 25-horsepower gas engine
     • V3DW3 - 25-horsepower diesel engine
     • V34E2 - electric

• Typical feed rate:
     • Fiber glass - 25-35 lbs. (11.3-15.9 kg)/min.
     • Rockwool - 35-55 lbs. (15.9-25.0 kg)/min.
     • Cellulose - 70-80 lbs. (31.7-36.1 kg)/min.

• Load height: 60" (152 cm)
• Height: 74" (188 cm)
• Depth: 56.5" (144 cm)
• Width: 75" (191 cm)
• Weight: 2000 lbs. (907 kg)
Volu-Mattic® III instruction manual (PDF)
Volu-Mattic® III brochure (PDF)




Adobe® Acrobat® Reader® software is required to display the PDFs. If you do not have Acrobat® Reader® on your computer, click the icon to the left to download and launch the installer.

Fully Sealed Blow-Through Air-Lock Feeder - The steel feeder has one-piece seals around all three sides of each rotor blade to create a tight seal under pressure and help eliminate wear in the feeder housing and ensure a more consistent flow of fiber. The machine is designed to blow through each chamber of the air-lock feeder to put insulation material directly into the airstream.

Positive Displacement Blower - The blower automatically increases pressure to the limit of the blower relief valve to prevent plugging of the hose.

Air Bleed System with Panel-Mounted Gauge - Allows for variable control of air volume to aid in fine-tuning of the air-to-material ratio.  

Four-Speed Transmission - Allows the operator to vary speed of all internal hopper components and air-lock feeder for additional control of the air-to-material ratio, for optimum material performance.

Material Control Slide - The easily adjustable slide position provides additional control of the air-to-material ratio.

Heavy-Duty Gearboxes - The Volu-Matic® III, Volu-Matic® III Electric, Volu-Matic® V, Multi-MaticT and Attic-MaticT are equipped with heavy-duty gearboxes. Synthetic lubricants are also used for a long, dependable life.  

Heavy-Duty Electric Clutches - Dependable 12-volt brushless clutches offer a long service life. The clutches allow for independent control of air and/or fiber flow.  

Automatic Back Flow Check Valve - The check valve in the air line between the blower and the feeder keeps material from being forced back into the blower by back-pressure when the machine stops blowing.

Automatic Pressure Relief Valve - Factory preset valve protects the positive displacement blower from pressure spikes.  

Electrical Overload Protection - All machines are protected by circuit breakers sized for the individual circuits. The circuit breakers are designed to be reset should a trip occur.  

Mechanical Overload Protection - Special, easily replaceable shear keys offer protection from damage by foreign objects.  

Self-Aligning Sealed Bearings - High quality bearings are used throughout the CertainTeed Machine Works product line. They are sealed to keep out dust and equipped with grease zerks for proper maintenance.  

Adjustable Drive Belts - Special belt-tightening screws make it easy to keep the belts properly tensioned as they wear.  

Wired Remote Control - A wired remote is supplied for machine control at the point of application.

Integrated Safety Features - Front, rear and side guards surround all moving parts. In addition to an electrical interlock that disables the drive mechanism when the front safety guard is opened, emergency stop switches are standard for additional protection.  

Wireless Remote Control - A wireless remote control is available as an option on all Unisul and CertainTeed Machine Works machines.  

Quick-Change Seal System - Standard on the Volu-Matic® IV, optional on the Volu-Matic® III and Volu-Matic® V. Allows quick access to the air-lock feeder rotor for inspection or replacement of seals when required.

Built-In Water Pump - Standard on the Volu-Matic® V and available for most machines, the built-in water pump is used to supply water and/or adhesive to the spray nozzle at the point of application.

Hopper Extensions - Increase capacity of standard material hopper. Frees up person in truck to do other tasks while hopper is emptying.

Question or Comment?
If you’ve seen a product you’re interested in, have purchased a product from us and need more info, or have any other general questions/comments, please let us know! We’ll get back to you ASAP!
Name:


Email Address:


Phone:


Comments:


 

         
 
Insulation Blowing Machines
Volu-Matic® SE
Volu-Matic® MS
Volu-Matic® III
Volu-Matic® III Electric
Volu-Matic® IV
Volu-Matic® V
TrueComfort®
Attic-Matic™
Multi-Matic™
Blowing Machine Comparative Matrix
Vacuums
Vac-Matic™
 
Fire Proofing Machines
Poly-Spray® C-500
 
Measurement Devices
Measure-Matic™
 
Accessories
Multi-Tank™
Wireless Remote Control Systems
MP-20 Water Pump Kits
Uni-Flex™ Hose
Tigerflex® Hose
Material Deceleration Box
Hose Accessories
Remote Control Cords
Liquid Supply Hose
Measurement Devices 
Spray Foam Equipment
Truck Mounted Rigs
Trailer Mounted and Portable Units
Graco® Fusion Air Purged Spray Gun
Graco® Fusion CS - Clear Shot Spray Gun
Graco® T2 Stick Pump
Extensive Graco Parts Inventory
Generators and Air Compressors
Dynasolve CU-6 Equipment Cleaner